INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 124)

3 - 30
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
3.4.4 Quick Reference SOP—Concentrator Methods
1 Verify that the concentrator is installed.
2 Refer to Section 3.1.4, Quick Reference SOP - Heat-up and Tune, on page
3-12 for startup instructions.
3 Verify that the desired method is displayed on the Analyze line.
4 Touch RUN ANALYZE or push ANALYZE RUN when the SYSTEM READY
screen is displayed.
5 When the screen prompts, Collect Sample Now, hold the probe over the
sample until the screen prompts, Sampling is Done.
6 When the run is complete, a Method Finished message will appear.
7 Refer to Section 3.5.1, View Results/View Reports, on page 3-32 for
information on data review.