12 how to create a method, Figure 11-46 – INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 410
11 - 50
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
11.12 How to Create a Method
WARNING
Only trained users should create methods. Selecting a
parameter that is incorrect may provide an inaccurate
analysis of the media being sampled.
CAUTION
Read all of
before creating a method.
HINT: For questions relating to specific settings, refer to the previous sections of
this chapter.
Creating a method is a very involved process. Creating a method from scratch is
best left to experts; however, custom methods can be written by modifying a default
method.
11.12.1 Creating a New Custom Method from an Existing Method
1
On the System Setup View, double-click on the Method Editor icon. See
Figure 11-46 Method Editor Icon
2
Choose the HAPSITE to which the method will be applied and click Open. See