Default.tun – INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 351
Advertising
10 - 5
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
NOTE: Tune files are saved, by default, to the HAPSITE hard drive under the
\Tune folder.
Figure 10-5 Manual Tuning Screen Showing Save Tune Button
When an attempt is made to exit manual tune without saving, a window will appear
asking Do you want to save the changes to a tune file? See
Figure 10-6
. To
save the file, press Yes. If not saving the tune file, press No. Pressing Cancel will
abort exiting tune without saving the tune file. If saving the tune file, the Save Tune
File window will appear as shown in
Figure 10-7
. Select a Tune file name and press
OK.
HINT: It is highly recommended to always save the tune as
default.tun
.
Figure 10-6 Save Changes Prompt
Advertising