INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 71
Advertising
2 - 33
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
is applied to the top elbow, the elbow should not slip on the Sample Loop. If the
elbow moves, the Loop is not properly seated. Reseat Loop and tighten slightly
more. See
Figure 2-54
.
Figure 2-54 Wrench tighten
8
Snap on the black cover labeled SAMPLE LOOP. The cover will fit snugly over
the Sample Loop. See
Figure 2-55
.
NOTE: If the cover does not easily fit over the Sample Loop, do not force it. Check
to ensure the Loop is correctly installed with the Loop fully seated into both
elbows and the nuts properly tightened for a secure fitting.
Figure 2-55 Sample Loop Cover Installed
Advertising