INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 98)

3 - 4
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
11 When the HAPSITE is ready to run samples, a green SYSTEM READY,
SURVEY READY or ANALYZE READY message will be displayed. See
Figure
3-5 .
NOTE: The HAPSITE takes about twenty minutes to complete the preparation
sequence from a cold start.
Figure 3-5 System Ready
NOTE: If the methods are at different temperature setpoints, the method that
is ready to run will have a green READY message next to the method
name. See
Figure 3-6 .
Figure 3-6 Ready Message