1 attaching the probe – INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 44
Advertising
2 - 6
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
2.4.1 Attaching the Probe
To attach the Probe line, plug the LEMO® connector into the port on the top of the
HAPSITE as illustrated in
Figure 2-11
.
Figure 2-11 Attaching the LEMO Connector on the Probe Line to the HAPSITE
HINT: Save all of the caps to cover ports in the event the instrument needs to be
decontaminated. Spare caps are provided in the Ship Kit. See
Figure 2-12 Spare Cap Kit
Advertising