INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 481)

15 - 7
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
15.5 Plus IQ Software for the Service Module
The Plus IQ software for the Service Module can be accessed in three ways from
the System Setup View:
 Double-click on the Service Module icon. See Figure 15-4 .
Figure 15-4 Service Module Icon
 Double-click on the Status icon. See Figure 15-5 . Click on the Service Module
Tab. See Figure 15-7 .
Figure 15-5 Status Icon
 Click on the Sensor icon with the right mouse button. Click on Properties with
the left mouse button. See
Figure 15-6 . Click on the Service Module Tab. See
Figure 15-7 .
Figure 15-6 Accessing Service Module in Plus IQ from the HAPSITE Sensor Icon