INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 134
3 - 40
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
16
The Qualitative Report can be found be touching the QUAL button. See
Figure
3-66
. Alternately, use the arrow keys to highlight the QUAL button and push
OK SEL. For each compound found, information regarding the Net Fit, the
retention time, the CAS number, the area and the number of hits will be
displayed.
Figure 3-66 Qualitative Report
17
The Quantitative Report can be found be touching the QUANT button. See
Figure 3-67
. Alternately, arrow keys highlight the QUANT button and push OK
SEL. For each compound found, information regarding the target ion, the
retention time, the Net Fit, the purity, the area and the concentration will be
displayed.
Figure 3-67 Quantitative Reports
NOTE: If the method is not quantitative, the message "No Quant Reports
Found" will be displayed on the QUANT report screen. To determine
if the method is quantitative, see the box in the bottom right hand
corner of the main screen. See
Figure 3-68
.