2 copying files from the usb – INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 199
Advertising
4 - 27
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
4.4.2 Copying Files From the USB
The Copying Files from the USB button can be used to transfer methods from the
laptop to the HAPSITE. To copy files to the USB, use the following procedure.
1
Insert the USB drive into the USB port which is located on the top left hand side.
See
Figure 4-35
.
NOTE: When inserting the USB drive, the solid portion should be on the right.
Figure 4-35 Inserting USB Drive
2
Close the front panel of the HAPSITE.
3
Touch the Accessories icon. Alternately, push the STAT button until the
Accessories icon is highlighted. See
Figure 4-36
.
Figure 4-36 Accessories Icon
Advertising