INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 430)

12 - 12
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
Figure 12-10 Accessing the Calibrate Function
3a Selecting the Calibrate function will display a dialog box used to select the type
of quantitative method being developed — Analyze (GC/MS) or Survey. See
Figure 12-11 .
NOTE: Methods can be built for Full Scan data or SIM (Selected Ion
Monitoring) data. Best practice is for the Select Method First box to
be checked, as the library is linked to the method.