INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 319)

9 - 11
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
9.5 The TIC/RIC Display Functions
There are tools available to assist in the Data Review process.
9.5.1 How to Access the Scan Cursor
The specific scan displayed in the Spectrum window is accessed using the Scan
Cursor in the TIC window. See
Figure 9-9 .
Figure 9-9 Location of the Scan Cursor
The Scan Cursor can be moved to the desired location by:
 Placing the mouse cursor over the Green Triangle, click and hold the Left
Mouse Button, then drag the cursor to the peak/area of interest.
 Double clicking the Left Mouse Button over the peak/area of interest.
 Using the arrow keys on the computer.