INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 102)

3 - 8
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
5 To take the system out of Emergency Mode, touch the EMER MODE button.
Alternately, use the arrow keys to highlight the EMER MODE button and push
OK SEL. The EMER MODE button will turn gray. See
Figure 3-13 .
Figure 3-13 EMER Mode Inactive
6 The HAPSITE ER will run a concentrator cleanout and prepare for general
(non-emergency) use.
3.1.2 Concentrator Options (CONC OPTIONS)
The CONC OPTIONS button has two selections: Concentrator Cleanout and
Skip Conc Cleanout. When Concentrator Cleanout is selected, the HAPSITE
will run a manual cleanout. When Skip Conc Cleanout is selected, the HAPSITE
will bypass the concentrator cleanout while the HAPSITE is preparing.
3.1.2.1 Concentrator Cleanout
1 Touch CONC OPTIONS or use the arrow keys to highlight the CONC
OPTIONS button and push OK SEL. See
Figure 3-14 .
Figure 3-14 Concentrator Options