INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 534)

16 - 36
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
6 Turn off the IS Supply and Tune Feed valves by clicking on the button under
each valve. The buttons are green when the valves are open and black when
closed. See
Figure 16-39 .
Figure 16-39 Sensor Status Grid
7 Close the Tune Status Panel and the Mass Calibration Status by deselecting
each. See
Figure 16-40 .
Figure 16-40 Closing Tune Status Panel and Mass Calibration Status
8 Click on the Full Scan icon in the Tune window. See Figure 16-41 .
Figure 16-41 Full Scan Icon