3 selecting a new method, Section 5.3 – INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 213
Advertising
5 - 7
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
5.3 Selecting a New Method
1
Click the Abort button. See
Figure 5-9 Aborting Method
2
Double-click on the Run Method icon. A dialog is displayed to choose the type
of method to run. This example is an Analyze (GC/MS) run, so double-click the
GCMS folder. See
Figure 5-10
.
NOTE: Use the buttons at the top of the dialog to choose the methods on the
HAPSITE.
Figure 5-10 Choosing the Mode of Operation
Advertising