INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 416
Advertising
11 - 56
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
6
Repeat
and
Step 5
until all desired methods are listed in the Method
Run List. See
Figure 11-56
.
Figure 11-56 Sequenced Method Options
7
In the Start column chose either Run Button or Immediately for each method.
This selection determines how each method in the run is started. Refer to
Figure 11-56
.
8
In the Sleep column, choose for or until for each method. Refer to
Figure
11-56
.
9
In the Time column, enter the desired Time for the next method to start or the
length of Time to sleep before the next method starts. Refer to
Figure 11-56
.
10
Click Save. Refer to
Figure 11-56
.
11
Save the sequenced method to the desired location. Click OK. See
.
Advertising