INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 195)

4 - 23
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
4.4 The USB Drive
4.4.1 Copying Files to the USB
Data files can be saved to the USB drive on the HAPSITE.
NOTE: Data is always saved to the hard drive of the HAPSITE. If the laptop is
connected, the data file will also be saved to the laptop. The USB drive is
designed to be used when the laptop is not connected to the HAPSITE, but
the laptop will be used later for further analysis.
1 Insert the USB drive into the USB port which is located on the top left hand side.
See
Figure 4-28 .
NOTE: When inserting the USB drive, the solid portion should be on the right.
Figure 4-28 USB Drive
2 Close the front panel of the HAPSITE.
3 Touch the Accessories icon. Alternately, push the STAT button until the
Accessories icon is highlighted. See
Figure 4-29 .
Figure 4-29 Accessories Icon