Metrohm viva 1.1 (ProLab) User Manual
Page 1001
■■■■■■■■■■■■■■■■■■■■■■
8 Manual control
viva 1.1 (for process analysis)
■■■■■■■■
989
End position
The position of the stepping motor can be modified manually on this tab;
it can be moved to the end position at most.
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Status
Display of the current status.
Selection
ACTIVE | INACTIVE | ERROR
[>]
Sets the stepping motor to ACTIVE and moves in the positive direction
as long as the button is pressed or until an end position is reached.
[<]
Sets the stepping motor to ACTIVE and moves in the negative direction
as long as the button is pressed or until an end position is reached.
Absolute position
An absolute position can be approached on this tab.
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Distance
Distance to be moved to.
Visible only in cases of stepping motors where Type = Linear drive.
Input range
-214783647 - 214783647 mm
Default value
0 mm