Metrohm viva 1.1 (ProLab) - Manual (Page 438)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
426 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
5.5.2.3.2 MOVE
5.5.2.3.2.1 MOVE - Overview
Dialog window: Method ▶ MOVE ▶ Properties... ▶ MOVE - 'Command name'
Command for moving to the desired position (sample position or spe-
cial beaker).
Instruments
This command can be executed with the following instruments:
Sample changer: 814, 815, 858, 919
Appearance
The command has the following appearance:
Parameters
The parameters for the MOVE command are configured in the following
dialog window:
￭ MOVE - Properties
Command variables
The following command variables are generated by the MOVE command
in the method run and can be used in formulas under the designation
'Command name.Variable identification':
Identification Description
BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command
has never been started
FIN Command status:
1 = Command has ended at least once
0 = Command has not yet ended
not valid (variable not available) = Command
has not yet been started
RAN Current absolute rotation angle of the rack in ° in
relation to the axis of the selected tower (entry when
exiting the command)