Metrohm viva 1.1 (ProLab) - Manual (Page 980)

8.4 Manual control - Functions
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
968 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
￭ General
￭ Moving
￭ Assigning position
￭ Pump
Devices
The changer functions can be carried out with the following devices:
￭ 814 USB Sample Processor
￭ 815 Robotic USB Sample Processor XL
￭ 858 Professional Sample Processor
￭ 919 IC Autosampler plus
8.4.5.2 Sample changer - General
Program part: Manual control
Information on the attached rack is displayed here.
Rack name
Shows the name of the attached rack. If no rack is attached, -------- is dis-
played.
Rack code
Shows the rack code of the attached rack. If no rack is attached, -------- is
displayed.
Number of positions
Shows the number of positions on the attached rack. If no rack is
attached, -------- is displayed.
[Initialize rack]
The attached rack is initialized.
NOTE
When the rack is initialized, the following actions are carried out:
￭ Rack rotates to the position for reading out the rack code.
￭ Rack data on the rack code is transferred to the sample changer.
￭ Lifts are moved upwards to 0 mm.
￭ The robotic arm is moved back.