Metrohm viva 1.1 (ProLab) - Manual (Page 451)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 439
5.5.2.3.6 STIR
5.5.2.3.6.1 STIR - Overview
Dialog window: Method ▶ STIR ▶ Properties... ▶ STIR - 'Command name'
Command for the control of a connected stirrer.
Instruments
This command can be executed with the following instruments:
Dosing Interface: 846
Sample changer: 814, 815, 858, 919
Professional CVS: 894
Appearance
The command has the following appearance:
Parameters
The parameters for the STIR command are configured in the following
dialog window:
￭ STIR - Properties
Command variables
The following command variables are generated by the STIR command in
the method run and can be used in formulas under the designation 'Com-
mand name.Variable identification':
Identification Description
BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command
has never been started
FIN Command status:
1 = Command has ended at least once
0 = Command has not yet ended
not valid (variable not available) = Command
has not yet been started