Metrohm viva 1.1 (ProLab) - Manual (Page 863)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Devices
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 851
Tabs
The parameters for the 858 Professional Sample Processor are set on
the following tabs:
￭ General
General device information, such as device name, device type, serial
number, etc.
￭ Tower
Properties of the tower.
￭ Rack
Information on the rack attached.
￭ Initializing position
Position which is automatically approached when the sample changer
is initialized.
￭ MSB #
Properties of the MSB connector and the peripheral devices connected
to it.
￭ GLP
Information on GLP tests and GLP monitoring.
7.3.2 Properties - General
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ General
General properties of the device are displayed on the General tab.
Device name
Name of the device, can be freely defined by the user.
Entry 50 characters
Default value Device type number_#
Device type
Shows the device type.
Program version
Shows the program version of the device.
[Update]
Opens the Load new program version dialog window (see Chapter
7.1.6, page 845).
This button is displayed only with devices that have their own firmware. It
is only enabled if the device has an old program version that is not sup-
ported by viva and that can be updated by viva itself.
Device serial number
Shows the serial number of the device.