Metrohm viva 1.1 (ProLab) - Manual (Page 884)

7.5 814/815 USB Sample Processor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
872 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
7.5 814/815 USB Sample Processor
7.5.1 814/815 USB Sample Processor - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'De-
vice type' - 'Device name'
The parameters for the 814 USB Sample Processor and 815 Robotic
USB Sample Processor XL are set on the following tabs:
￭ General
General device information such as device name, device type, serial
number, etc.
￭ Tower
Properties of the tower.
￭ Rack
Information on the rack attached.
￭ Initializing position
Position which is automatically approached when the sample changer
is initialized.
￭ MSB #
Properties of the MSB connector and the peripheral devices connected
to it.
￭ GLP
Information on GLP tests and GLP monitoring.
7.5.2 Properties - General
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ General
General properties of the device are displayed on the General tab.
Device name
Name of the device, can be freely defined by the user.
Entry 50 characters
Default value Device type number_#
Device type
Shows the device type.
Program version
Shows the program version of the device.
[Update]
Opens the Load new program version dialog window (see Chapter
7.1.6, page 845).