Metrohm viva 1.1 (ProLab) - Manual (Page 349)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 337
4.6.2 Curve properties
4.6.2.1 Curve properties - General parameters
Dialog window: Database / Workplace ▶ Curves # ▶ Properties Curves #
Command type
Selection of the command type for which the curve properties are to be
defined. The curve properties defined for each command type are saved
per curve window and per client.
Selection CVS | CPVS | CP | MEAS Ref | MEAS Spec |
MEAS Opt | CAL Spec | MEAS TMF | MEAS T
Default value CVS
NOTE
When the dialog window is opened, the Command type that applies
for the curve shown in the curve window will be selected by default.
4.6.2.2 Curve properties VA measuring command
4.6.2.2.1 Curve properties VA measuring command - x Axis
Tab: Workplace / Database ▶ Curves # ▶ Properties Curves # ▶ x Axis
Parameters for the graphical display of the curves on the x axis.
Quantity
Selection of the quantity to be shown on the x axis.
CVS
Selection
Current [A] | Potential [V] | Time [s] | Current
measuring range [A]
Default value Potential [V]
CPVS
Selection
Current [A] | Potential [V] | Time [s] | Current
measuring range [A]
Default value Time [s]
CP
Selection
Current [A] | Potential [V] | Time [s] | Potential
measuring range [V]
Default value Time [s]