Metrohm viva 1.1 (ProLab) - Manual (Page 754)

6.2 Administration
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
742 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
in under Windows will be adopted as the user name. If this is the case,
then all subsequent parameters are deactivated.
Enforce login with password
on | off (Default value: off)
If this check box is activated, then each time the program starts the login
window will appear, in which the user must enter not only his or her user
name but also a password. If this option is disabled, then all of the sub-
sequent parameters will be deactivated.
Password monitoring by MagIC Net
on | off (Default value: on)
If this option is enabled, then the password will be monitored by viva in
accordance with the subsequent parameters.
Password monitoring by Windows
on | off (Default value: off)
If this option is enabled, then the password will be monitored in accor-
dance with the parameters defined in Windows. The parameters for pass-
word protection are deactivated in this case.
CAUTION
In order to prevent an unwanted login by means of the Guest user cat-
egory that is defined by default in Windows when performing password
monitoring with Windows, it is imperative that this user also be
assigned a password or (even better) be deactivated.
CAUTION
If this option is enabled, then the user names in Windows and viva
must necessarily match, because otherwise the user will no longer be
able to log in to viva. In order to ensure this, once this selection has
been made, the Test login dialog window (see Chapter 6.2.2.2, page
745) appears in which the logged-in user must log in with his or her
Windows password. If this test login fails, then the Security settings
dialog window will remain open.