Metrohm viva 1.1 (ProLab) - Manual (Page 518)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
506 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Entry 25 characters
Device
Device name
Selection of a device from those available in the device table. Only devices
with which the command can be executed are available.
Selection 'Device name' | not defined
Default value not defined
not defined
In this case, the device name must be assigned by the user at the start
of the method.
Device type
Display or selection of the instrument type. If an instrument is selected in
the Device name field, the Device type field can no longer be edited
and the instrument type belonging to the instrument is displayed.
If the not defined option is selected in the Device name field, all instru-
ment types or groups with which the command can be executed can be
selected, regardless of the instruments present in the device table.
Selection RS 232 device
Default value RS 232 device
Transfer commands
The directions defined in the Transfer commands dialog window are
sent in the order in which they are listed. The table cannot be edited
directly.
NOTE
A maximum of 10 transfer commands can be entered.
Moves the selected command up (changes the sequence).
Moves the selected command down (changes the sequence).
[New]
Opens the Transfer command dialog window for entering a new trans-
fer command (see Chapter 5.5.2.6.6.3, page 507).