Metrohm viva 1.1 (ProLab) - Manual (Page 1031)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
9 Support
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 1019
The Export configuration data dialog window opens.
3 Select the desired configuration data.
4 Click on [OK].
The Export configuration data dialog window closes and the
Save dialog window opens.
5 Select or enter name and directory for the export file. If an existing
export file is selected, it will be overwritten.
6 Click on [Save].
The export of the configuration data is started.
The selected configuration data is then saved in a file with the exten-
sion .mcfg.
9.1.4.2 Importing configuration data
How to proceed?
1 Select the Configuration program part.
2 Click on the File ▶ Import... menu item.
The Open dialog window opens.
3 Select or enter a new name and directory for the *.mcfg import file.
4 Click on [Open].
The Import configuration data dialog window opens.
5 Select the desired configuration data.
NOTE
Data that is not present in the export file cannot be selected.
6 Click on [OK].
The import is started and the selected configuration data is imported.