Metrohm viva 1.1 (ProLab) - Manual (Page 430)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
418 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
5.5.2.2.5.2 CALL INTERCEPT - Properties
Dialog window: Method ▶ CALL INTERCEPT ▶ Properties... ▶ CALL INTERCEPT -
'Command name'
Command name
Name of the command.
Entry 25 characters
Call text
Freely editable text for the designation of the call; the text is displayed in
the command depiction.
Entry 50 characters
Default value 'empty'
Track name
Selection of the VA track to be called up. All of the VA tracks available in
the method are displayed.
Selection 'Track name' | 'empty'
Default value 'empty'
Condition
on | off (Default value: off)
Expression for the condition(s) that can be created or edited with the for-
mula editor after clicking on or by double-clicking in the text field (see
Chapter 2.3, page 21).
If this check box is activated, then the call is carried out only if the evalua-
tion of the condition yields the result 1 (= true).
Entry 1,000 characters
Default value 'empty'
5.5.2.2.6 CALL COND
5.5.2.2.6.1 CALL COND - Overview
Dialog window: Method ▶ CALL COND ▶ Properties... ▶ CALL COND - 'Command
name'
Command for the repeated calling of a VA track which continues to
be executed until one of the stop criteria is fulfilled. This command is used
chiefly for the conditioning of electrodes.
Appearance
The command has the following appearance: