Metrohm viva 1.1 (ProLab) - Manual (Page 751)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 739
NOTE
Deleting user groups is only possible if the group no longer contains
any users.
6.2.1.3 User
6.2.1.3.1 User - Details
Dialog window: Configuration ▶ Tools ▶ User administration...
If a user in a user group is selected in the left-hand side of the User
administration dialog window, then details on this user will be shown
on the right-hand side.
User
Shows the short name of the user that must be entered in the User field
at the time of login. This name is defined when a new user is created and
cannot be subsequently modified.
Entry 24 characters
Full name
Full name of the user.
Entry 256 characters
Status
Shows the current status of the user. Only users of the Administrators
group can modify the status.
Selection enabled | disabled | removed
enabled
Users with the enabled status can log in as usual. An exception is the
first login after the change in status from disabled or removed to
enabled. If this is the case, then a Start password must be assigned
with which this user can log in again.
disabled
Users with the disabled status can no longer log in. They will be auto-
matically set to this status as soon as the number of login attempts
defined in the Security settings has been exceeded.