Metrohm viva 1.1 (ProLab) - Manual (Page 978)

8.4 Manual control - Functions
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
966 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
8.4.4 Remote functions
Program part: Manual control
If a Remote Box or a remote interface is selected in the subwindow for the
device selection, then the functions and parameters that are possible with
the elements appear in the subwindow for functions/parameters.
Devices
The remote functions can be carried out with the following devices:
Voltammetry instrument: 894
Sample changer: 814, 815, 858, 919
Spectrometer: Avantes
Dosing Interface: 846
Input signal
Is not shown for the Avantes spectrometer because it has no input lines.
Current status
Shows the current status of the eight input lines.
Templates/Entry
If the current status corresponds to one of the defined templates for the
inputs, the corresponding name is shown here.
NOTE
Only templates without asterisks * are recognized.
Output signal
Current status
Shows the current status of the 14 output lines.
Templates/Entry
Entry of the bit pattern for the output signal or selection of a predefined
signal pattern.
It is possible to enter the following characters:
0 = line inactive
1 = line active
* = any line status