Metrohm viva 1.1 (ProLab) - Manual (Page 461)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 449
Parameters
The parameters for the ADD AUX command are configured in the follow-
ing dialog window:
￭ ADD AUX - Properties
Command variables
The following command variables are generated by the ADD AUX com-
mand in the method run and can be used in formulas under the designa-
tion 'Command name.Variable identification':
Identification Description
BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command
has never been started
CYL Cylinder volume of the dosing unit used for the com-
mand
FIN Command status:
1 = Command has ended at least once
0 = Command has not yet ended
not valid (variable not available) = Command
has not yet been started
VOL Currently dosed volume in L (Number)
5.5.2.4.2.2 ADD AUX - Properties
Dialog window: Method ▶ ADD AUX ▶ Properties... ▶ ADD AUX - 'Command
name'
Command name
Name of the command.
Entry 25 characters
Auxiliary solution
Solution
Entry of a solution name, selection of an auxiliary solution from the solu-
tion table or selection of a standard solution from the method or from the
solution table. The selection of a solution from the solution table is neces-
sary only if the solution is to be added automatically with a dosing device