Metrohm viva 1.1 (ProLab) - Manual (Page 951)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Devices
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 939
for Control task = Free controller
Input range
0 - 100 %
Default value 90 %
Increment
for Control task = Digestion unit
Input range
0 - 100 %
Default value 0.5 %
for Control task = Free controller
Input range
0 - 100 %
Default value 10 %
Control delay
for Control task = Digestion unit
Input range
0.0 - 9,999.0 s
Default value 5.0 s
for Control task = Free controller
Input range
0 - 9,999.0 s
Default value 10 s
7.10.9 Properties - GLP
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ GLP
Tab: Configuration ▶ Dosing units ▶ [Edit] ▶ Properties... ▶ Dosing unit - 'Na-
me' ▶ GLP
Tab: Configuration ▶ Solutions ▶ [Edit] ▶ Properties... ▶ Solution - 'Name' ▶ GLP
Last GLP test
Date of the last GLP test. This date can be selected by clicking on in
the Select date dialog window (see Chapter 2.4.1, page 77).
Comment on GLP test
Comment regarding the GLP test.
Entry 1,000 characters
Monitoring of GLP validity
on | off (Default value: off)
If this check box is activated, then the time interval for the GLP test is
monitored.