6 exit track, Exit track – Metrohm viva 1.1 (ProLab) User Manual
Page 415
■■■■■■■■■■■■■■■■■■■■■■
5 Method
viva 1.1 (for process analysis)
■■■■■■■■
403
The series end track is executed in the run only once at the end of the last
determination of a series after the main track. This track can be used, e.g.,
to set sample changers to the required state at the end of a series.
NOTE
No voltammetry commands can be inserted in a series end track (see
Chapter 5.5.2.11.1, page 606).
5.5.1.2.6
Exit track
Subwindow: Method
An exit track is a track that can be created manually by the user with
Insert
▶ New track... ▶ Exit track or with the icon. It starts with the
EXIT command (see Chapter 5.5.2.9.7, page 589) and ends with the
END command. Only one exit track can be inserted in a given method.
The exit track is executed in the run when all normal tracks and VA
tracks as well as the main track have been completed or when the
determination is manually canceled.