Metrohm viva 1.1 (ProLab) - Manual (Page 889)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Devices
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 877
Rack position
Predefined position on the rack. The lift is lowered to the work position
defined for that position.
Special beaker
Special position on the rack defined in the rack properties. The lift is
lowered to the work position defined for that position.
External position
External position which is defined for the Swing Head mounted to the
tower. The lift is lowered to the work position defined for that posi-
tion.
Number
Specification of the number of the rack position, of the special beaker or
of the external position.
Only editable for Move to initial position = on, otherwise inactive.
for Move = Rack position
Input range
1 - 999
Default value 1
for Move = Special beaker
Input range
1 - 16
Default value 1
for Move = External position
Input range
1 - 4
Default value 1
7.5.6 Properties - MSB #
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ MSB #
The MSB # tabs show the properties of the MSB connector and the devi-
ces connected to it.
Request for dosing device preparation
Selects when to display the request to execute the PREP command (see
Chapter 5.5.2.4.7.1, page 467) (prepare) for the dosing device connected
to the MSB.
At program start
on | off (Default value: on)
If this check box is activated, then the request to prepare the dosing
device is displayed every time the program is started.