Metrohm viva 1.1 (ProLab) - Manual (Page 179)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Workplace
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 167
CPVS
Selection
Current | Potential | Time | Time to finish | Cur-
rent measuring range | off
Default value off
CP
Selection
Current | Potential | Time | Time to finish |
Potential measuring range | off
Default value off
MEAS T
Selection
Time | dT/dt | Temperature | off
Default value off
MEAS Opt
Selection
Time | Measured value | Intensity | Transmis-
sion | Saturated pixels | Temperature | dε/dt |
Calculated 1 - 3 | External 1 - 3 | off
Default value off
MEAS TMF
Selection
Time | Measured value | Transmission | Tem-
perature | dε/dt | off
Default value off
Color
Selection of the curve color for the quantity to be shown on the y2 axis.
CVS, CPVS, CP
Selection
Color selection | black
Default value black
MEAS T
Selection
Color selection | pink
Default value pink
MEAS Opt, MEAS TMF
Selection
Color selection | green
Default value green
Show grid
on | off (Default value: off)
If this check box is activated, then a grid will be displayed.