Metrohm viva 1.1 (ProLab) - Manual (Page 601)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 589
Parameters
Command name
Name of the command.
Entry 1 - 25 characters
Default value Series end track
Live display
on | off (Default value: on)
If this check box is activated, then the track will be displayed in the live
display.
Command variables
The following command variables are generated by the command SERIES
END in the method run and can be used in formulas under the designa-
tion 'Command name.Variable identification':
Identifi-
cation Description
BSY Command status:
1 = BUSY, HOLD or ERROR
0 = READY
invalid (variable not available) = Command has never
been started
FIN Command status:
1 = Command has ended at least once
0 = Command has not yet ended
invalid (variable not available) = Command has never
been started
5.5.2.9.7 EXIT
Dialog window: Method ▶ EXIT ▶ Properties... ▶ EXIT - 'Command name'
Start command for the exit track.
Appearance
The command has the following appearance: