Metrohm viva 1.1 (ProLab) - Manual (Page 125)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Workplace
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 113
3.4 Sample assignment table
3.4.1 Sample assignment table
Dialog window: Workplace ▶ Tools ▶ Sample assignment table... ▶ Sample assign-
ment table
The Sample assignment table causes the samples to be processed
automatically with the correct method. A particular method is assigned
to a sample identification (Assignment ID). In order for this to work, the
Method selection by assignment ID option must be activated on the
Process tab in the properties of the Single determination or Determi-
nation series and one of the sample identifications must be selected as
assignment ID. As soon as an Assignment ID has been recognized dur-
ing the processing of sample data, the respective method will be loaded
automatically. The Method field can then no longer be edited and is
grayed out.
NOTE
The sample assignment table is valid for all open workplaces and is
saved per client.
The overview table shows all defined assignment IDs and cannot itself be
directly edited. The table can be sorted according to the selected column
in ascending or descending order by clicking on the column title Assign-
ment ID or Method.
Assignment ID
Identification on the basis of which the method is assigned.
Method
Method that is loaded for the assignment ID.
[New]
Adds a new sample assignment.
[Properties]
Edit the selected sample assignment.
[Delete]
Deletes the selected sample assignment.