Metrohm viva 1.1 (ProLab) - Manual (Page 564)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
552 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Entry 250 characters
Default value 'empty'
5.5.2.8 Process analysis commands
5.5.2.8.1 Process analysis commands - Overview
Menu item: Method ▶ Insert ▶ New command...
Commands for controllers that are controlled with process analysis
instruments.
The following commands can be selected:
￭ DIGITAL OUT
Actuating digital outputs.
￭ DIGITAL IN
Loading digital inputs.
￭ ANALOG OUT
Outputting results in analog values.
￭ ANALOG IN
Loading analog inputs.
￭ CONTROL
Controlling Beckhoff instruments.
￭ STEPPING MOTOR
Actuating a stepping motor.
￭ PORT
Actuating a multi-port valve.
5.5.2.8.2 DIGITAL OUT
5.5.2.8.2.1 DIGITAL OUT - Overview
Dialog window: Method ▶ DIGITAL OUT ▶ Properties... ▶ DIGITAL OUT - 'Com-
mand name'
Instruments
This command can be executed with the IO controller and the Stepping
Motor Controller.
Appearance
The command has the following appearance:
Mode of operation
Digital outputs can be actuated two different ways:
￭ They can be set to active or inactive with or without start delay.