Metrohm viva 1.1 (ProLab) - Manual (Page 860)

7.2 846 Dosing Interface
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
848 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Input range 0.1 - 999.9 h
Default value 12 h
Connected devices
This is where information about the following peripheral devices con-
nected to the MSB connector is displayed:
Dosing device 1
Dosing device type
Shows the dosing device type.
Dosing device serial number
Shows the serial number of the connected dosing device.
Stirrer 1
Stirrer type
Shows the stirrer type.
Stirrer serial number
Shows the serial number of the connected stirrer.
Remote Box 1
Shows the Remote Box connected.
7.2.4 Properties - GLP
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ GLP
Tab: Configuration ▶ Dosing units ▶ [Edit] ▶ Properties... ▶ Dosing unit - 'Na-
me' ▶ GLP
Tab: Configuration ▶ Solutions ▶ [Edit] ▶ Properties... ▶ Solution - 'Name' ▶ GLP
Last GLP test
Date of the last GLP test. This date can be selected by clicking on in
the Select date dialog window (see Chapter 2.4.1, page 77).
Comment on GLP test
Comment regarding the GLP test.
Entry 1,000 characters