Metrohm viva 1.1 (ProLab) - Manual (Page 902)

7.7 089 Photometer
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
890 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
7.7 089 Photometer
7.7.1 089 Photometer - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'De-
vice type' - 'Device name'
The parameters for the 089 Photometer are set on the following tabs:
￭ General
General device information such as device name, device type, serial
number, etc.
￭ Settings
Information on light source and heater.
￭ Adjustment
Information on the determination of the transmission factor.
￭ MSB #
Information on dosing device preparation and connected devices.
￭ GLP
Information on GLP tests and GLP monitoring.
7.7.2 Properties - General
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ General
General properties of the device are displayed on the General tab.
Device name
Name of the device, can be freely defined by the user.
Entry 50 characters
Default value Device type number_#
Device type
Shows the device type.
Program version
Shows the program version of the device.
[Update]
Opens the Load new program version dialog window (see Chapter
7.1.6, page 845).
This button is displayed only with devices that have their own firmware. It
is only enabled if the device has an old program version that is not sup-
ported by viva and that can be updated by viva itself.
Device serial number
Shows the serial number of the device.