Metrohm viva 1.1 (ProLab) - Manual (Page 22)

1.10 What is new in viva?
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
10 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
￭ Templates for output lines
Various signal patterns for the output lines are predefined under
Tools
▶ Templates. Like custom-designed input lines, they can be
exported and imported.
￭ Calibration data subwindow
The Calibration data subwindow lists all calibration data sets. The
calibration data list can be output as a PDF file. Data sets that are no
longer required can be deleted.
Manual program part
￭ Temperature measurement
The temperature of a solution can be measured manually.
1.10.2 Improvements
General
￭ E-mails to several recipients
E-mails can be sent to several recipients.
￭ Special characters in user-defined results
Additional special characters (
+, *, (, )) can be used in the names of
user-defined results.
Workplace program part
￭ Curves subwindow / Measurement curve
In the curve window, a separate tab with the respective command
name (e.g. CVS 1) is displayed for each measuring command. The way
the tabs are arranged depends on how the commands are ordered in
the run.
￭ Curves subwindow / Calibration curve
The calibration curve window has been redesigned with a clearer
arrangement. The window partition now automatically adjusts to the
contents displayed when the window is enlarged or reduced.
￭ MEAS TMF
The determination of the transmission factor (MEAS TMF command)
has been optimized.
Database program part
￭ New example determinations (for import)
The example determinations have been re-recorded in viva 1.1 and
replace the existing viva 1.0 example determinations. In addition,
example determinations are available that include new commands and
calibration methods (see Chapter 9.1.2.6, page 1007).
￭ Faster recalculation
The recalculation is much faster when determinations are reprocessed.
￭ Faster display of measurement curves
Measurement curves for large determinations are displayed much
faster in the Curves subwindow.