Metrohm viva 1.1 (ProLab) User Manual
Page 314
4.5 Determination overview
■■■■■■■■■■■■■■■■■■■■■■
302
■■■■■■■■
viva 1.1 (for process analysis)
Start value
Initial value for scaling the y1 axis.
Editable only when autoscaling is disabled.
Input range
-1.00E+12 - +1.00E+12
Default value
-1.00E+12
End value
End value for scaling the y1 axis.
Editable only when autoscaling is disabled.
Input range
-1.00E+12 - +1.00E+12
Default value
+1.00E+12
Curve
Axis label
Selection of the color for the designation of the y1 axis.
Selection
13 colors | black
Default value
black
Symbol
Selection of the symbol for the display of the individual measuring points.
Selection
● | ╳ | ✸ | ■ | ▲ | no symbol
Default value
no symbol
no symbol
Measuring points are not shown.
Show original curve
on | off (Default value: off)
If this check box is activated, then the original curve will be displayed
instead of the smoothed curve.
Show spikes
Symbol
Selection of the symbol for the display of spikes.
Selection
● | ╳ | ✸ | ■ | ▲ | no symbol
Default value
no symbol
no symbol
Spikes are not shown.