Metrohm viva 1.1 (ProLab) - Manual (Page 531)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 519
Identification Description
LP.CAx Calculated value × (1 - 3) for the last measuring point
in the measuring point list
LP.CNT Transmission of the last measuring point in the mea-
suring point list in %
LP.EXx External value × (1 - 3) for the last measuring point in
the measuring point list
LP.MEA Measured value for the last measuring point in the
measuring point list in the unit of the measured value
LP.TEM 1) Temperature for the last measuring point in the mea-
suring point list in °C
LP.TIM Time in s until the last measuring point in the measur-
ing point list is reached
LP.TRN Transmission of the last measuring point in the mea-
suring point list in %
MA.[MEA] Maximum measured value in the unit of the mea-
sured value
MA.CNT Intensity for maximum measured value in counts
MA.TEM 1) Temperature for minimum measured value in °C
MA.TIM Time for the minimum measured value in s
MA.TRN Transmission for maximum measured value in %
MI.[MEA] Minimum measured value in the unit of the measured
value
MI.CNT Intensity for minimum measured value in counts
MI.TEM 1) Temperature for minimum measured value in °C
MI.TIM Time for the minimum measured value in s
MI.TRN Transmission for minimum measured value in %
MTE Temperature measurement with sensor; (1 = on, 0 =
off)
2)
NMP Number of measuring points in measuring point list
STY Type of stop with which the command was stopped:
1 = finished normally, 0 = stopped manually
with [Quit] or [Stop]
1) Command variable is invalid for the Avantes spectrometer
2) For the Avantes spectrometer, MTE always equals 0