Metrohm viva 1.1 (ProLab) - Manual (Page 339)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 327
Saving a method
[Save as...]
With this button, the determination method can be saved in a method
group. To accomplish this, the Save method window is opened, in which
the method group is selected and a method name can be entered or
selected.
4.5.2.13 Determinations - Displaying history
Menu item: Database ▶ Determinations ▶ Show history
Activating/deactivating history view
With the Determinations ▶ Show history menu item or the icon,
only the currently focused determination and all the saved determination
versions will be shown in the determination table.
If the history view is disabled again with the Determinations ▶ Show
history menu item or the icon, then the original selection of determi-
nations will appear again in the determination table.
Making an old version current
The Determinations ▶ Make current menu item or the icon causes
the determination version selected in the table to be made the current
determination version again. This creates a new determination whose ver-
sion number is increased by +1 compared with the last version to have
been saved.
4.5.2.14 Determinations - Making current
Menu item: Database ▶ Determinations ▶ Update
Making an old version current
The Determinations ▶ Update menu item or the icon causes the
determination version selected in the table to be made the current deter-
mination version again. This creates a new determination whose version
number is increased by +1 compared with the last version to have been
saved.
4.5.2.15 Determinations - Showing calibration curve
Dialog window: Database ▶ Determinations ▶ Show calibration curve... ▶ Calibra-
tion curve/Calibration data
Calibration curves are shown only for the CAL LOOP Opt command.
With the Determinations ▶ Show calibration curve... menu item or
the icon the calibration curve or standard addition curve for the deter-
mination selected in the Calibration curve/Calibration data dialog
window is shown.