Metrohm viva 1.1 (ProLab) - Manual (Page 374)

4.7 Subwindow Information
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
362 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
NOTE
If a different name has been defined for the method variables assigned
to the sample data variables ID1 - ID16, Sample amount, Unit,
Sample position in the START command, then the title shown here
will consist of this name and additionally the standard name in brackets
(e.g. Batch (ID2)).
4.7.5 Information - Configuration
Tab: Database ▶ Information ▶ Configuration
Shows general information on the devices, sensors and variables used.
Device 'Device name'
Information about the device used (only the existing device information
will be shown).
Device type:
Type of device.
Program version:
Device program version.
Device serial number:
Serial number of the device.
FPGA version:
FPGA = Field Programmable Gate Array.
Version of the FPGA software of the device.
Sample Changers
Rack name:
Name of the rack on the sample changer.
Rack code:
Rack code of the rack on the sample changer.
Tower:
Number of the tower on which a Swing Head is used.