7 meas t, 1 meas t - overview, Meas t – Metrohm viva 1.1 (ProLab) User Manual
Page 557
■■■■■■■■■■■■■■■■■■■■■■
5 Method
viva 1.1 (for process analysis)
■■■■■■■■
545
Stop measured value
Stop when the entered measured value has been reached since the start
of the measurement.
Input range
0 - 4,000 mAU
Selection
off
Default value
off
off
No stop.
Temperature
Temperature
Measuring temperature, which can be entered manually. The temperature
is measured continuously when Temperature measurement = contin-
uous (General/Hardware tab).
Input range
20.0 - 60 °C
Default value
25.0 °C
5.5.2.7.7
MEAS T
5.5.2.7.7.1
MEAS T - Overview
Dialog window: Method
▶ MEAS T ▶ Properties... ▶ MEAS T - 'Command name'
Command for temperature measurements.
Devices
This command can be executed with the following instruments:
Voltammetry: 894
Appearance
The command has the following appearance:
Parameters
The parameters for the MEAS T command are set on the following tabs:
■
General/Hardware
Parameters for devices, sensors and stirrers.
■
Measuring parameters
Parameters for setting the measurement procedure.