Metrohm viva 1.1 (ProLab) - Manual (Page 278)

4.4 Templates
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
266 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Field separator
Selection of the field separator.
Selection ; | , | TAB
Default value ;
Record separator
Selection of the data set separator (CR = Carriage return, LF = Line feed).
Selection CR/LF | CR | LF
Default value CR/LF
Header
on | off (Default value: on)
If this check box is activated, the column headers are output at the begin-
ning of the export file.
4.4.3.2.4 Export template - Options for measuring point list
Dialog window: Database ▶ Tools ▶ Templates ▶ Export templates... ▶ Export
templates ▶ [Properties] ▶ Export template 'Name' ▶ [Options] ▶ Options for
measuring point list
The Options for measuring point list dialog window, in which separa-
tors can be defined, is opened with [Options] in the properties window
for export templates.
Field separator
Selection of the field separator.
Selection ; | , | TAB
Default value ;
4.4.3.2.5 Export template - Request at file export
Dialog window: Database ▶ Tools ▶ Templates ▶ Export templates... ▶ Export
templates ▶ [Properties] ▶ Export template 'Name'
If the Request on each export option has been selected in the proper-
ties of the export template under File name (see Chapter 4.4.3.2.1, page
262), then the File export dialog is displayed before the export of a
determination. If several determinations have been marked for export,
then this dialog will be displayed for each individual determination.
Target directory
Shows the target directory for the export file, which has been defined in
the properties of the export template used (see Chapter 4.4.3.2.1, page
262).