Metrohm viva 1.1 (ProLab) - Manual (Page 620)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
608 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
4 Waiting time 1
Idle until the period defined in the Waiting time 1 parameter has
expired.
5 Potential 2
Potential 2 is applied to the electrodes.
6 Waiting time 2
Idle until the period defined in the Waiting time 2 parameter has
expired.
7 Potential 3
Potential 3 is applied to the electrodes.
8 Waiting time 3
Idle until the period defined in the Waiting time 3 parameter has
expired.
only for hydrody-
namic measurement
= off
9 Stirrer off
The stirrer is switched off.
Sweep
1 Start potential
The Start potential defined in the sweep is applied to the elec-
trodes.
2 Equilibration time
Idle until the period defined in the Equilibration time parameter
has expired.
3 Sweep
The sweep is executed in accordance with the defined sweep param-
eters.