Metrohm viva 1.1 (ProLab) - Manual (Page 792)

6.5 Solutions subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
780 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Comment on GLP test
Comment regarding the GLP test.
Entry 1,000 characters
Monitoring of GLP validity
on | off (Default value: off)
If this check box is activated, then the time interval for the GLP test is
monitored.
Monitoring cannot be switched on until after a date has been entered in
the "GLP test date" field.
GLP test interval
Time interval to next GLP test. If a value is entered here, then the date in
the Next GLP test field will be adjusted automatically.
Only editable if monitoring is switched on.
Input range
1 - 999 days
Default value 999 days
Next GLP test
Date on which the next GLP test is to be carried out. The date can be
selected by clicking on in the Select date dialog window (see Chap-
ter 2.4.1, page 77). After the date has been entered, the GLP test inter-
val field will be adjusted automatically.
Only editable if monitoring is switched on.
Default value
GLP test date + 999 days
Message
The message options can only be edited if monitoring is switched on.
Message by e-mail
on | off (Default value: off)
The message is sent to the address defined under [E-mail...] if this check
box is activated. The message is sent in text format.
[E-mail...]
[E-mail...] opens the Send e-mail window (see Chapter 2.5.1, page 79).