Metrohm viva 1.1 (ProLab) - Manual (Page 185)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Workplace
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 173
Calibration curve table
The table below the calibration curve shows a list of the calibration points
recorded. It contains the following columns:
CALL
Name of the CALL command that has called the corresponding VA track.
Var
Variation number.
Rep
Replication number.
Peak potential
Peak potential determined.
Area
Peak area determined (for Evaluation quantity = Area).
Height
Peak height determined (for Evaluation quantity = Height).
Display
on | off (Default value: on)
Indicates whether a measurement curve is displayed in the curve window
or not.
Buttons
Selection on
The marking of the calibration points selected in the table is activated.
Selection off
The marking of the calibration points selected in the table is deactivated.
3.9.2 Curve properties
3.9.2.1 Curve properties - General parameters
Dialog window: Database / Workplace ▶ Curves # ▶ Properties Curves #
Command type
Selection of the command type for which the curve properties are to be
defined. The curve properties defined for each command type are saved
per curve window and per client.