2 analog output – Metrohm viva 1.1 (ProLab) User Manual
Page 997
Advertising
■■■■■■■■■■■■■■■■■■■■■■
8 Manual control
viva 1.1 (for process analysis)
■■■■■■■■
985
8.4.6.5.2
Analog output
Program part: Manual control
If a single analog output is selected in the device list, then the output can
be controlled in the subwindow for functions/parameters on the Set
value and Set default tabs.
The current value for the analog output is displayed in the subwindow for
the graphical display.
Set value
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Mapping
Shows the mapped value range.
Value
Entry of the value to be set on the analog output.
Advertising